Cisco Expansion Module 7914 Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für IP-Telefon Cisco Expansion Module 7914 herunter. Cisco Expansion Module 7914 33 Seiten. Expansion module cme
Auch für Cisco Expansion Module 7914: System Manual (50 seiten), System Manual (36 seiten), Telefon-Handbuch (33 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken

Position the phone so that the front of the phone is

Step 1

facing up.

Line up the two open slots on the bottom of the

Step 2

7914 Expansion Module with the two hooks on the

support bar.

Insert the hooks into the slots and then rotate the top

Step 3

of the 7914 Expansion Module into the support bar so

that it rests flush with the bar.

Tighten the thumbscrew on the back of the

Step 4

7914 Expansion Module.

Note

Connect the Interface Cable

Refer to the following table, which depicts the "in" and "out"

icons on the AUX jacks, and to Figure 5 and the steps that

follow.

In icon

On your Cisco IP Phone 7960G or

Note

7914 Expansion Module, the AUX jack may be

labelled RS-232. In this case read "RS-232 jack" for

AUX jack in Figure 5 and Steps 1 – 4 in this section.

If you are installing two Expansion Modules,

repeat Steps 2 and 3 for the second Expansion

Module.

Out icon