Cisco Small Business Pro SPA 502G Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für IP-Telefon Cisco Small Business Pro SPA 502G herunter. Cisco Small Business Pro SPA 502G 7 Seiten. 1 line ip phone
Auch für Cisco Small Business Pro SPA 502G: Benutzerhandbuch (18 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Kurzreferenz-Handbuch (4 seiten), Schnellstart-Handbuch (14 seiten), Konfigurationshandbuch (12 seiten), Konfigurationshandbuch (12 seiten), Benutzerhandbuch (1 seiten), Kurzreferenz-Handbuch (2 seiten), Konfigurieren von (8 seiten), Schnellstart-Handbuch (2 seiten), Verwendung von (2 seiten), Schnelles Benutzerhandbuch (2 seiten)

Step 2

Insert the long end of the phone cord into the receiver port on the phone

body that is marked with a phone symbol.

Step 3

(Optional) Route the phone cord through the cable slot.

Step 4

Insert the other end of the phone cord into the port at the bottom of the receiver.

Step 5

(Optional) Connect the phone stand by lining up the tabs on the stand with the slots on

the phone body. Slide the bottom tabs into the lower slots on the phone body and lightly

press down on the stand. It should easily slide into the upper stand slots. Do not force.

Step 6

If you are using an external power source, insert one end of the power cord into an outlet

and insert the other end of the power cord into the power port on the phone body.

Step 7

Connect your phone to the network using one of the methods below:

•

Using an Ethernet connection

Insert one end of the Ethernet cable into the network port on the phone body marked 'SW'. Insert

the other end of the Ethernet cable into the appropriate device, such as a network switch, on your

network.

•

Using a wireless connection

You can use a Cisco WBP54G Wireless-G Bridge with the IP phone to create a wireless connection

between the phone and the network. See the WBP54G documentation on www.cisco.com for more

information. The 'Where to go from here' section contains links to the documentation area on www.

cisco.com.

Step 8

(Optional) To provide network access to a PC, connect one end of an additional Ethernet cable

(not provided) to the PC port on the back of the phone body. Connect the other end of the

Ethernet cable to the network port on your PC.

Step 9

(Optional) To install the phone on a vertical surface, use the Cisco MB100 Wall Mount bracket.

See the Cisco Small Business IP Phone SPA50X User Guide (SIP) or the Cisco Unified

Communications Manager Express for the Cisco Small Business IP Phone SPA50X documents

on www.cisco.com for more information.

0800 040 8888

v1 - 06/13

working with daisy