Ricoh Aficio 2238C Technisches Bulletin - Seite 12

Blättern Sie online oder laden Sie pdf Technisches Bulletin für Alles in einem Drucker Ricoh Aficio 2238C herunter. Ricoh Aficio 2238C 12 Seiten. Sap printing
Auch für Ricoh Aficio 2238C: Spezifikationen (2 seiten), Spezifikation (2 seiten), Handbuch (12 seiten)

Ricoh Aficio 2238C Technisches Bulletin
th
Updated: 30
Model:
Jupiter-C1
11. Others
Subject
Meter charge
An external meter charge
counter
device counter mistakenly
increments twice
Hard disk
Hard disk initialization and
initialization
data loss after switching
and data loss
the machine on
External
B/W pages in the data sent
counter
from the driver as a Color
counts up
job are not counted up by
incorrectly
the external counting
device when the device is
set to prohibit B/W prints.
Note: The mainframe
counters increment
correctly.
Remote
Concorde captures the
service
Development Counter data
system
instead of the Page
Counter.
Total counter
The value for the single
color counter is not
included in the value for
the printer total counter
Noise
Booklet finisher
The machine
After multiple PCL forms
stalls
are sent to it
Damaged
A small area on the lower
platen cover
front edge of the platen
cover sheet is damaged.
Cannot go
to the Ready
state
T
echnical
December 2007: Changes in bold italics
Symptom
B
ulletin
Date:
RTB #
Cause
001
Engine
006
firmware
005
System
003a
firmware
(occurs with
version 1.12.2
or older)
021
Printer
firmware
003c
System
firmware
003f
System
firmware
040
Grounding
plate damaged
during
installation
021b
Printer
firmware
044
The sheet is
gradually worn
down because
the user always
touches it when
opening/closing
the cover.
MB
Incorrect type
B149
of hard disk
017
installed.
No.:
15-Sep-04
Solution
Install the latest engine
firmware (ver 1.09b or
later).
If not available, change
SP5-121 to "1: Paper
Exit".
Install the latest system
firmware (ver 1.14.1 or
later)
Install the latest printer
firmware (ver. 1.03.1 or
later)
Install new system
firmware (ver. 1.20 or
later).
Install new system
firmware (ver. 1.23 or
later).
Be careful during
installation.
Repair or replace the
grounding plate.
Install the latest printer
firmware (ver. 1.06 or
later)
Temporary: Cover the
damaged part with tape, or
turn the sheet around.
Permanent: Install the
modified platen cover
sheet
Install the correct type of
hard disk.
PAGE: 12/12
RB149000h
Note
Need Ver.
1.09B
Modified
sheet: P/N
G3291371