Epson EB-PU2213B Kurzreferenz - Seite 2

Blättern Sie online oder laden Sie pdf Kurzreferenz für Projektor Epson EB-PU2213B herunter. Epson EB-PU2213B 6 Seiten.

Seite drucken
Epson EB-PU2213B Kurzreferenz

Turning the Projector On

1. Turn on your computer or image
source.
2. Remove the lens cover.
On button on the
3. Press the
projector or the remote control.
After the status light stays blue, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User's Guide.
If your image does not appear, see

"Switching Between Image Sources"

or "Troubleshooting."
Note: This projector requires a 220 V
power source for normal operation. Limited
functionality is temporarily available when
connected to a 120 V power source. For
details, see your online User Guide.
Changing the Language of
the Projector Menus
The default language of the projector's
menu system is English, but you can
change it as necessary.
1. Press the Menu button to access
the projector's menu system.
2. Select Extended > Language.
3. Select your language.
4. When you're done, press the Menu
button to exit.
On button; just
Switching Between Image
Sources
Press the Search button or one of the
source buttons (remote control), or the
Source Search button (projector).

Selecting the Lens Type

Make sure the Lens Type setting is
correct for the lens you are using.
1. Press the Menu button.
2. Select Extended > Operation >
Advanced > Lens Type.
Note: If the Lens Type setting is greyed
out, the projector has automatically
detected the installed lens and you can
skip the remaining steps.
3. Select the lens you are using.
4. When you're done, press the Menu
button to exit.

Changing Screen Type

Set the Screen Type setting to the
screen's aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
Screen > Screen Type.
3. Select the screen's aspect ratio.
Note: The displayed image should match
the screen's size and aspect ratio.