Ricoh SP 200 Handbuch zur Schnellinstallation - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Alles in einem Drucker Ricoh SP 200 herunter. Ricoh SP 200 2 Seiten. Software installation guide
Auch für Ricoh SP 200: Handbuch zur Schnellinstallation (2 seiten), Software-Installationshandbuch (21 seiten), Handbuch zur Schnellinstallation (2 seiten)
Seite drucken
Installing the Driver for
Using the Fax Function
USB
SP 200SF/201SF/202SF Only
Connecting the Handset
CFT052
Click [USB Quick Install].
CTT059
Connection
1
2
3
CTT093
1. Port For Handset
2. Port For External Telephone
3. Port For LINE
CTT143
CTT071
CTT052
CTT144
CTT064
CTT097
CTT078
Selecting the Telephone
Setting the Outside Line
Line Type
Access Number
If you have selected PBX, use the following
Press the [
] key.
procedure.
Press the [
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
CTT006
Press the [▼] or [▲] keys to select [PBX
Press the [▼] or [▲] keys to select [Fax
Access Number], and then press the
Features], and then press the [OK]
[OK] key.
key.
Enter the outside line access number
Press the [▼] or [▲] keys to select
using the number keys, and then press
[Comm. Settings], and then press the
the [OK] key.
[OK] key.
Press the [
Press the [▼] or [▲] keys to select
the initial screen.
[Dial/Push Phone], and then press the
[OK] key.
Press the [▼] or [▲] keys to select the
telephone line type appropriate for
Basic Operation for
your telephone service, and then press
Sending a Fax
the [OK] key.
Press the [
] key to return to
Press the [
the initial screen.
Selecting the Telephone
Network Connection Type
Press the [
] key.
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
Place the original on the exposure glass
key.
or in the ADF.
Press the [▼] or [▲] keys to select
Enter the fax number using the number
[Comm. Settings], and then press the
keys.
[OK] key.
Press the [
Press the [▼] or [▲] keys to select
When you place original on the exposure glass
and Memory Transmission mode is enabled,
[PSTN / PBX], and then press the [OK]
perform the following steps to scan the subse-
key.
quent pages of the original.
Press the [▼] or [▲] keys to select
Press the [1] key within 60 seconds,
[PSTN] or [PBX], and then press the
place the next original on the exposure
[OK] key.
glass, and then press the [OK] key.
Press the [
] key to return to
Repeat this step until all originals are scanned.
the initial screen.
Press the [2] key to start sending the
fax.
] key.
] key to return to
] key.
CTT102
] key.
© 2013
EN CN
M133-8623
Quick Installation Guide