Ricoh SP 313SFNW V Setup-Handbuch - Seite 14

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Alles in einem Drucker Ricoh SP 313SFNW V herunter. Ricoh SP 313SFNW V 45 Seiten.

Connecting the Machine via Network

This section explains how to connect the machine to a computer using a network cable or wireless LAN.

Perform the setup according to the following procedures.

1. Checking the IP Address Settings(See page 12)

2. Printing the Configuration Page (See page 13)

3. Quick Install for Network (See page 13)

4. Wire LAN Settings (See page 22)

Connecting the Computer and Machine (See page 3)

Configuring network settings (See page 3)

•

IPv

•

IPv

•

If using the Ethernet cable, proceed to step . If using Wi-Fi connection, proceed to step .

Confirm the network environment you want to use. Perform the following procedure using a computer on the network to which the

printer will be connected. The following procedure uses Windows as an example.

Click the [Start] menu.

Enter "cmd" in the [Search programs and files] field, and then press the [Enter] key.

The command prompt appears.

Enter "ipconfig /all", and then press the [Enter] key.

The details about the network environment appear.

1. DHCP Enabled

"Yes" is displayed if the addresses on the screen were assigned by DHCP. The network settings can be automatically config-

ured.

"No" is displayed if the addresses on the screen were not assigned by DHCP.

2. IP address, subnet mask, and default gateway

The IP address, subnet mask, and default gateway that have been assigned to the computer are displayed.

For manual configuration, use the same values as displayed here.

•

To manually specify the setting using Ethernet connection, make a note of the checked IP address.

DPH03

5. Wi-Fi Settings (See page 15)

•

Quick and Easy Setup Using the WPS Button (See page )

•

Quick and Easy Setup Using the PIN Code (See page )

•

Manual Settings (Confirm the SSID and Encryption key) (See

page )

CVW601