Ricoh Aficio CL2000 Zusatzhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Zusatzhandbuch für Drucker Ricoh Aficio CL2000 herunter. Ricoh Aficio CL2000 38 Seiten. Sap printing
Auch für Ricoh Aficio CL2000: Spezifikationen (2 seiten), Handbuch (12 seiten)
![Ricoh Aficio CL2000 Zusatzhandbuch](/uploads/products/server2/5361009/5361009.png)
E E E E
Enter the IP address of the printer.
Enter Printer host IP address <xxx.xxx.xxx.xxx> [re-
turn=skip]:
192.168.15.16
Note
❒ The IP address will be added to the /etc/hosts file.
❒ If the host name of the printer has already been configured, press the { { { { RE-
TURN} } } } key. Nothing will be added to the /etc/hosts file.
F F F F
Enter the host name of the printer.
Enter Printer host name : nphost
Note
❒ The host name will be added to the /etc/hosts file.
❒ If no IP address was entered in step
file.
G G G G
Configure the printer name.
Enter logical printer name [default nphost_prn]
If you want to use the default name, press the { { { { RETURN} } } } key. Enter a new
name, if you want to use a different one.
Note
❒ The host name entered in step
H H H H
Set the print option.
Enter remote printer name [default lp]:
• Press the { { { { RETURN} } } } key, and print with PCL or PostScript is enabled.
• If you want to set the device option, enter the option parameter.
Enter remote printer name [default lp]:tray=tray1
For more information about the device option, see p.19 "Specifying the De-
vice Option".
• If you enter "text", text printing is enabled.
If you enter "text", printing with PCL and PostScript is disabled.
Enter remote printer name [default lp]:text
Limitation
❒ You can enter up to 14 characters for HP-UX 11.0, 256 for Solaris 8 and Red
Hat Linux 7.0, and 51 for Red Hat Linux 6.2.
❒ When printing with the lp command, use ( _ ) instead of ( = ) and ( ; ) in-
stead of ( , ) for operating systems that cannot use ( = ) and ( , ) such as So-
laris 2.5 or later.
After the installation shell script setup is complete, and if you enter the IP ad-
E
dress in step
, the following message appears.
hosts file is modified
E
, nothing is added to the /etc/hosts
F
followed by "_prn" appears in "default".
Using the Installation Shell Script
1
7