Ricoh Aficio CL3000e DOT Zusatzhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Zusatzhandbuch für Drucker Ricoh Aficio CL3000e DOT herunter. Ricoh Aficio CL3000e DOT 38 Seiten. Sap printing
Auch für Ricoh Aficio CL3000e DOT: Spezifikationen (2 seiten), Handbuch (12 seiten)

Seite drucken

❒ The spool directory should normally be made under /var/spool/lpd and

the name should match that listed under the sd capability in /etc/print-

cap. Change the owner and group of the directory to root and lp. The fol-

lowing examples show how to make a /var/spool/lpd/npd spool

directory.

# cd /var/spool/lpd

# mkdir npd

# chown root npd

# chgrp lp npd

❖ ❖ ❖ ❖ Making the log file

Error messages are logged to a file created in the /var/log directory. The log

file name is the printer name followed by "d-errs".

Note

❒ The log file is used for logging some errors or warning messages by the

UNIX workstation.

❒ The log file should be made for every network printer entry listed in the

/etc/printcap file.

❒ The log file should normally be made under /var/log directory and the

name should match that listed under the lf capability in /etc/printcap.

Change the owner and group of the log file to root and lp. The following

examples show how to make a /var/log/npd-errs file.

# cd /var/log

# touch npd-errs

# chown root npd-errs

# chgrp lp npd-errs

Solaris

❖ ❖ ❖ ❖ Adding the IP address and host name to the /etc/hosts file

The following line is added to the /etc/hosts file. The IP address and printer

host name which you previously entered in the installation script will be

used.

192.168.15.16 nphost # Network Printer

• 192.168.15.16 is the IP address, nphost is the host name, from # to the end

of the line is a comment.

Note

❒ The /etc/hosts file contains a list of the IP addresses and their host names

of all of the hosts communicating on the network. Each entry is delimited

with a space or a tab, and each line is separated with a return.

❒ If you do not use NIS or DNS, you must manually enter the IP address and

host name of each workstation using the network printer in the /etc/hosts

file.

Using the Installation Shell Script