Ricoh Aficio GX2500 Support-Handbuch - Seite 23
Blättern Sie online oder laden Sie pdf Support-Handbuch für Drucker Ricoh Aficio GX2500 herunter. Ricoh Aficio GX2500 25 Seiten. Support guide
Auch für Ricoh Aficio GX2500: Spezifikationen (2 seiten), Ergänzendes Handbuch (1 seiten)
![Ricoh Aficio GX2500 Support-Handbuch](/uploads/products/server2/5361339/5361339.png)
Product Support Guide
Version 1.1 (01/08/08)
XIX. Service Tables
There are two service modes for this machine:
A. Service Mode. This mode is menu driven and includes important items for some adjustments as well as other
important functions such as displaying the firmware version number, clearing the memory, printing reports, and so
on.
B. Engine Maintenance (SP) Mode. Consists of SP codes SP1000 to SP7532. These are printer engine SP
adjustments, primarily but not exclusively used by designers for machine adjustments.
1. Entering/Exiting Service Mode
To enter Service Mode:
1. Press and hold [ ] [ ] for 3 sec., release > [#Enter] > "Service Menu".
2. [#Enter]> "Bit Switch"
• Bit Switch
• Reset Settings
• Service Summary
• Version Display
• Serial No. Edit
• Counter Setting
• Fax No. (Not Used)
• E. Saver Display
To Exit the Service Mode
1. Press [Escape]> "Service Menu".
1. [ ] or [ ]> "End"> [#Enter]> Standby
These items are available on the Service Menu.
• Bit Switch
• Reset Settings
• Service Summary
• Version Display
Counter Settings
• Serial No. Edit
• Fax No. (Not Used)
• E. Saver Display
2. Entering/Exiting SP Mode
To enter SP Mode
1. Press and hold [ ] [ ] for 3 sec., release> [#Enter].
SYSTEM Ver. 0.51
Service Menu
2. [ ] or [ ]> "Engine Maint."> [#Enter].
Engine Maint. allows changing the settings of individual SP codes (SP1000 to SP7532. For more
about individual SP code settings, refer to the tables in this section. There are no settings available for
the following groups: SP4000, SP6000, SP8000, SP9000.
To exit SP mode
1. At any level in the SP mode press [No] to return to the first level.
SYSTEM Ver. 0.xx
Service Menu
2. [ ] or [ ]> "End"> [#Enter].
The machine leaves the SP mode and switches off.
3. Press [Power] to switch the machine on.
MODEL: J015
Bit Switch Bit switches 1 to 8. (Described in detail below.)
Initialize System. Clears all SP code settings are restores their default settings.
Prints the Service Summary. The service summary lists information about the
current status of the machine.
Displays the version number of the printer engine.
Counter Display. Switches the counter display on and off.
LevColor Disp. Switches the level counter display on and off.
Coverage Count. Switches the coverage counter on and off.
Double Count. Switches double counting on and off.
Note: The default setting for all theses items is "Off".
Information contained in this document can change at anytime.
23