ActronAir MRE-050AS Handbuch für Installation und Einrichtung - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch für Installation und Einrichtung für Zubehör für Klimageräte ActronAir MRE-050AS herunter. ActronAir MRE-050AS 20 Seiten. Ultraslim ducted, bulkhead ducted and cassette systems

Seite drucken

Installation Guide

4. INSTALLATION METHOD

smart port

Fig 4-4

b. Conection to indoor unit with no wired connection.

If you want to use both wire controller and WIFI control at the

Run the 6m Extension Cable (Supplied) from the Smart Port Receiver CN2

same time , you can use the CN3 port on the smart port

4. INSTALLATION METHOD

connector to the indoor pcb terminal CN40. See Figure 4-10.This is the

terminal to connect the wire controller ( shown as Fig 4-4).

required method of installation if using exclusively with Wi-Fi or if using

with a remote controller.

3.Wiring gure

smart port

Please con rm the connective wires group-1 (shown in

Fig 4-3) , one side is connected to the port CN40 on indoor

main PCB board , another side is plugged into CN40 on the

WIFI smart port terminal . On some case , when you need

a extension cord , please contact your distributor .

If want to extent the wire ,please use extension cord

(purchased separately) . (See Fig.4-3)

4-core shielding wire

Installation Guide - Easyconnect App

Document: 9590-4009 Ver. 2 201126

Easyconnect App

Extension cord

Figure 4-9

The connective wires group-2

Extension cord

(purchased separately)

Extension cord

Figure 4-10

wire controller

Mainboard

CN40

The connective wires group-1

Fig 4-3