Ricoh Pro L5130 Schnellstart-Quide - Seite 28
Blättern Sie online oder laden Sie pdf Schnellstart-Quide für Drucker Ricoh Pro L5130 herunter. Ricoh Pro L5130 32 Seiten. Additional function 2
Auch für Ricoh Pro L5130: Rip-Einstellungen Handbuch (44 seiten), Handbuch mit Sicherheitsinformationen (32 seiten), Handbuch (12 seiten)
CIP Training L5160/L5130
Additional Functions
Edit
Describing the procedure of
- Overwriting the record data that already registered.
- Add another print mode setting to the registered media record.
[How to operate]
1. Retrieve the number of the media record.
2. Edit the parameters following procedure.
The heater temperatures are saved when performing Media feed adjustment or
Drop position adjustment. If the heater temperature is changed, execute Media feed
adjustment and Drop position adjustment before register.
Regarding "Order to set" in the table below,
if the parameters of No.1 are changed, follow the procedure of No.2, 3 and 4 again
and optimize the parameters of No.2, 3 and 4.
Similarly, if parameters of No.2 are changed, follow the procedure of No.3 and 4 again
and optimize the parameters of No.3 and 4.
Parameters
Media shape
Media type
Media width
Media thickness
Heater ON/OFF
Heater temperature
Head height
Vacuum level
Auto detect media width
- ON/OFF
Auto detect media width
- right side edge/width
Special feed settings
Special wind settings
Procedure
These parameters are not able to edit after registered.
Please register again following the section of "Register".
1. Move to Home screen.
2. Press [Heater setting] and change settings.
1. Press [Head height] and change setting.
1. Press [Media settings]
2. Select the parameter to edit and change setting.
Order to
set
-
No.1
No.2