ACDC BSS-00504S Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Arbeitslicht ACDC BSS-00504S herunter. ACDC BSS-00504S 13 Seiten. Solar led matrix lamp kit
Seite druckenController Installation
Knock two nails into the wall
which the PowerPack is going
to be installed, with the distance
of 100mm between the two nails.
Hang the Power Pack on the wall.
The PowePack & lamps
should be installed in a
shaded location, avoiding
direct sunlight and must
be free from moisture.
Do not invert the
the leak of battery fluid
caused by invert will result
in the damage of battery.
Electrical Connection
STEP1
Press the button on the top of the PowerPack to the "ON" position before use.
Main Switch
Back View
Mounting Hole
PowePack
,
Use a blunt object to depress the switch.
IMPORTANT: Turn switch off for long term
storage.
Page5
Lamp Installation
Hang the lamp based on requirements.
The surface temperature of
the controller will heat up
during use, please avoid
contact and exposure with
combustibles.
The Power Pack and
the lamps are
designed for indoor
(protected) use only.