Ricoh SP 150SUw Handbuch für Wi-Fi-Verbindungen - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Wi-Fi-Verbindungen für Drucker Ricoh SP 150SUw herunter. Ricoh SP 150SUw 16 Seiten.
Auch für Ricoh SP 150SUw: Setup-Handbuch (2 seiten)
Seite drucken
2. Connecting with a Computer via a Wi-Fi Router
You can connect your computer with the printer via a Wi-Fi router
(wireless access point).
Install the printer driver and "RICOH Printer" software on your
computer first to use the printer via wireless network.
For Windows
Installing the Printer Driver and
"RICOH Printer" Software
Prepare the following items for the installation.
• CD-ROM provided with the printer*
• USB cable
* If your computer is not equipped with a CD-ROM drive, down-
load the installer from the RICOH official website at:
http://www.ricoh.com/printers/sp150/support/gateway/
1. Press and hold the
printer.
2. Connect the computer to a Wi-Fi router.
3. Press and hold the
1 second or longer.
The power indicator turns blue and the Wi-Fi function is ena-
bled on the printer.
4. Insert the CD-ROM into the CD-ROM drive on the
computer or start the downloaded installer from
the RICOH official website.
The installation menu appears on the screen.
5. Connect the computer with the printer using a USB
cable.
power key to turn on the
power key on the printer for
6. Select [Wi-Fi Configure and Installation] in the
installation menu.
7. Click [License Agreement] and read the license
agreement.
8. Click [Exit] to close the license agreement window.
9. If you accept the license agreement, select the
check box of [I have agreed to use Ricoh Printer
Driver], and click [Next].
Available access points are searched for, and found access
points are displayed in the list.
• You cannot proceed to the next step without accepting the
license agreement.
10. Select the access point (the Wi-Fi router connected
with the computer in step 2), and click [Next].
11. Enter the password to connect with the selected
access point, and click [Next].
• If the [Key Index] setting is displayed, select the option
corresponding to the SSID and entered password from the
pull-down list.
3