Ricoh SP 200 Handbuch zur Schnellinstallation - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Drucker Ricoh SP 200 herunter. Ricoh SP 200 2 Seiten. Software installation guide
Auch für Ricoh SP 200: Handbuch zur Schnellinstallation (2 seiten), Software-Installationshandbuch (21 seiten), Handbuch zur Schnellinstallation (2 seiten)
Seite drucken
Installing the Driver for USB
Connection
and Reading the Manual
For details about specifying network settings,
see "Software Installation Guide".
CTT136
CTT137
1
2
CTT139
Using the Fax Function
SP 200SF/201SF/202SF Only
Connecting the Handset
CXP065
CTT143
CXP066
CTT052
CXP067
CTT064
CXP068
CTT078
CXP069
Selecting the Telephone
Connection
Line Type
Press the [
1
2
3
CTT093
1. Port For Handset
2. Port For External Telephone
Press the [▼] or [▲] keys to select [Fax
3. Port For LINE
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[Dial/Push Phone], and then press the
[OK] key.
Press the [▼] or [▲] keys to select the
telephone line type appropriate for
your telephone service, and then press
CTT071
the [OK] key.
Press the [
the initial screen.
Selecting the Telephone
Network Connection Type
Press the [
CTT144
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
Press the [▼] or [▲] keys to select
[PSTN / PBX], and then press the [OK]
key.
CTT097
Press the [▼] or [▲] keys to select
[PSTN] or [PBX], and then press the
[OK] key.
Press the [
the initial screen.
Setting the Outside Line
Access Number
If you have selected PBX, use the following
] key.
procedure.
Press the [
] key.
Press the [▼] or [▲] keys to select [Fax
Features], and then press the [OK]
key.
Press the [▼] or [▲] keys to select
[Comm. Settings], and then press the
[OK] key.
CTT006
Press the [▼] or [▲] keys to select [PBX
Access Number], and then press the
[OK] key.
Enter the outside line access number
using the number keys, and then press
the [OK] key.
Press the [
] key to return to
the initial screen.
Basic Operation for
Sending a Fax
] key to return to
Press the [
] key.
] key.
Place the original on the exposure glass
or in the ADF.
Enter the fax number using the number
keys.
Press the [
] key.
When you place original on the exposure glass
and Memory Transmission mode is enabled,
perform the following steps to scan the subse-
quent pages of the original.
Press the [1] key within 60 seconds,
place the next original on the exposure
glass, and then press the [OK] key.
] key to return to
Repeat this step until all originals are scanned.
Press the [2] key to start sending the
fax.
© 2013
EN CN
M133-8697
Quick Installation Guide
CTT102