Ricoh Caplio G3 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Digitalkamera Ricoh Caplio G3 herunter. Ricoh Caplio G3 18 Seiten. 35mm camera
Auch für Ricoh Caplio G3: Broschüre (4 seiten)

Seite drucken
Ricoh Caplio G3 Benutzerhandbuch
G. Troubleshooting
Refer to the symptoms and measures listed below before submiting the camera for repairs. If the
problem persists, contact your nearest Ricoh Service Center.
„Power Supply
Symptom
The power does not
Batteries are not loaded. Or they are
come on.
exhausted.
The AC Adaptor is not connected
correctly.
Because the camera overheated the
power was automatically turned off.
The power cuts out
The camera was left unattended and
during use.
not used, so Auto Power-Off shut it
off.
Batteries are running low.
The power does not
Camera malfunction.
go off.
Cannot recharge the
Battery life.
batteries.
Batteries run out
They are being used in extreme high
quickly.
or low temperatures.
Many shots are being taken in dark
places inside, requiring flash.
„Shooting
Symptom
Even if I press the
Batteries are not loaded. Or they are
button, the camera
exhausted.
does not shoot.
The power is not on. Or the camera
is not in Shooting Mode.
The shutter button is not pressed all
the way.
The SD Memory Card is not
formatted.
The SD Memory Card does not have
any free space.
End of SD Memory Card life.
The flash is recharging.
The SD Memory Card is "locked".
The SD Memory Card's contact
surfaces are dirty.
Cause
Load the batteries correctly. Recharge or use
the AC Adaptor.
Reconnect it properly.
Wait until the temperature of the camera
returns to normal. Do not attempt to cool the
camera suddenly.
Turn the power back on.
If you are using alkaline batteries, replace
them.
If you are using a rechargeable battery,
recharge it or use the AC adaptor.
Reload batteries.
If using the AC Adaptor, reconnect it.
Replace the batteries with a new set.
Cause
If using alkaline batteries, replace the batteries
with a new set.
If using rechargeable batteries, recharge or
use the AC Adaptor.
Turn the power on and turn the Mode Dial to
Shooting Mode.
Press the shutter button all the way.
Format the card.
Load a new card, or delete unwanted files.
Load a new SD Memory Card.
Wait until the flash lamp stops blinking.
Release the "Lock (write-protection)".
Wipe off with a soft, dry cloth.
160
Measure
—
—
Measure
Appendices
Page
p.9
p.10
p.11
p.11
—
p.13
p.100
p.9
p.10
p.11
p.9
p.10
p.11
p.10
—
—
Page
p.9
p.10
p.11
p.13
p.33
p.33
p.97
p.15
p.85
p.15
p.47
p.15
—