Ricoh AP610N - Aficio B/W Laser Printer Ergänzendes Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Ergänzendes Handbuch für Drucker-Zubehör Ricoh AP610N - Aficio B/W Laser Printer herunter. Ricoh AP610N - Aficio B/W Laser Printer 38 Seiten. Sap printing
Auch für Ricoh AP610N - Aficio B/W Laser Printer: Installationshandbuch (1 seiten), Service-Handbuch (20 seiten), Handbuch (12 seiten)

Ricoh AP610N - Aficio B/W Laser Printer Ergänzendes Handbuch
Reference
For more information about how to make the above settings, see the manual
that comes with this machine.
Checking the IP address configuration
Follow the procedure below to make sure that the IP address has been config-
ured correctly.
• The following procedure uses the sample IP address: 192.168.15.16.
A A A A
Enter the following:
# ping 192.168.15.16
If the address has been configured correctly, the following message appears:
192.168.15.16 is alive
If the address has been configured incorrectly, the following message appears:
no answer from 192.168.15.16
Note
❒ When you use NIS, the IP address and host name are written to /etc/hosts
on the master server. When you use DNS, the information is written to a
data file on the name server. After writing the host name and IP address to
the file, make sure that the configuration is correct by pinging the host.
# ping host_name
❒ If the host name is registered with an IP address, the server can access the
printer using its host name instead of its IP address.

Executing the Installation Shell Script

Having configured the printer IP address, follow the procedure below to execute
the installation shell script and set up the workstation printing environment.
Preparation
Before executing the installation shell script, the IP address, host name and
printer name are required.
The following procedures use the sample IP address: 192.168.15.16; sample
host name: nphost; and sample printer name: np.
Note
❒ Use ftp to get the installation shell script from the printer.
A A A A
Log on to the workstation as root.
Note
❒ If you do not log on as root, the installation shell script will not run.
B B B B
Get the installation shell script from the printer.
Using the Installation Shell Script
1
5