Epson ELPMB47 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Epson ELPMB47 herunter. Epson ELPMB47 16 Seiten.

Fitting the Projector Plate to the Projector

Warning

v Tighten the screws firmly.

After tightening the screws, retighten them firmly and make sure that they are not loose.

v Install the supplied safety wire to prevent the projector from falling. sp.31

v Applying a screw-locking adhesive, lubricant, oil or other substance to the points at

which the projector is fixed to the ceiling mount can make the case crack and the

projector fall, leading to damage or injury. Do not use any sort of adhesive, lubricant

or oil when installing or adjusting the ceiling mount.

Procedure

Attach the projector so that the

projector plate is on the same side as the

projector's lens.

Align the screw holes for the ceiling mount fixing

points with the holes for the projector plate. See

the "User's Guide" supplied with the projector for

details on the position of the projector's ceiling

mount fixing points.

Tighten the supplied four screws (M6 x 16) in

the screw holes of the projector plate using

the supplied M6 hexagonal wrench.

Tighten and secure the three remaining screws.

Caution

When attaching the projector plate to the projector,

make sure you use the screws supplied.

on the