Ricoh Aficio MP C5000 Benutzerhandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Scanner Ricoh Aficio MP C5000 herunter. Ricoh Aficio MP C5000 41 Seiten. Papercut ricoh embedded manual
Auch für Ricoh Aficio MP C5000: Broschüre & Specs (8 seiten), Kurzreferenz-Handbuch (42 seiten), Schnellstart-Handbuch (19 seiten), Schnellstart-Handbuch (45 seiten), Handbuch zur Fehlersuche (23 seiten)
PaperCut – Ricoh Embedded Manual
2 Installation
This section covers the installation of the PaperCut embedded application for compatible
Ricoh devices. The embedded application will allow the control, logging and monitoring of
walk-up off-the-glass copier, scan and fax usage and may serve as a release station for
network prints (for information on just tracking network printing see the PaperCut user
manual).
2.1 Requirements
Ensure that the following points are checked off before getting started:
PaperCut is installed and running on your network. Please see the 'Installation'
section of the PaperCut user manual for assistance.
Ensure that your Ricoh device supports ESA SDK version 2 or later. Check the
device lists in 2.1.1 and 2.1.3 below.
Ensure you know which SDK version your device supports. Installation instructions
will vary slightly for different SDKs.
Ensure that the Java card is installed. (This must be purchased and installed by a
Ricoh dealer).
For SDK version 4 (or later) devices, the System Parameter SP-5113-2 must be set
to "Expansion Device 1". NOTE: This setting can only be changed by a Ricoh
Technician. We recommend getting this changed when the Java card is
installed.
For devices prior to SDK 10.0, verify that the "Other Function" button is installed on
the left of the Ricoh LCD screen (this is below the Copy/Fax/Scanner buttons – see
screenshot below). This button will activate the PaperCut embedded application and
is usually installed by a Ricoh technician when the Java card is installed. The "Other
Function" button is installed underneath the other Copier, Fax, and Scanner buttons
on the left of the LCD screen.
Figure 1: Pre SDK 10 device showing "Other Function" button
Copyright © 2012 PaperCut Software International Pty. Ltd., All Rights Reserved.
Revision: 19
2012-10-26
4 of 41