Epson EMP 600 - SVGA LCD Projector Kurzreferenz-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Projektor Epson EMP 600 - SVGA LCD Projector herunter. Epson EMP 600 - SVGA LCD Projector 17 Seiten. Quick reference guide
Seite drucken
Tip
If a laptop computer or a computer with a
LCD screen has been connected to the
projector, you may need to change the
output destination for video signals
depending on the computer keys (
or
) or the computer's settings. The
output destination can normally be
changed by holding down the computer's
key and pressing one of the
Function keys.
Once the source has been changed, after
a short wait the projector will start
projecting. If the output has been
changed to external output, only the
external output should be used.
For details, refer to the documentation
provided with your computer.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
After restarting the computer,
change the Control Panel
monitor and sound settings
so that Mirroring is active.
If images do not appear ...
Change the input
signal.
If you have other problems ...
Refer to the online
Help information.
Press
, and
then follow the
instructions.
Projecting
Projector
Remote Control
Projector
Remote Control
* Refer to Troubleshooting.