Cisco 1600 series Hardware-Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Router Cisco 1600 series herunter. Cisco 1600 series 14 Seiten. Rdiag router analog ipsec
Auch für Cisco 1600 series: Schnellstart-Handbuch (12 seiten), Schnellstart-Handbuch (8 seiten), Installieren oder Ersetzen des Handbuchs (10 seiten)

&RQQHFWLQJ &LVFR :,& WR WKH :$1

The 1-port serial WAN interface card (see Figure 3 – already built in the router) has a DB-60 serial

port. Use the correct cable (contained in the package) for your serial WAN interface card (CAB-

232MT).

6WHS Use the serial cable and connect one end of the cable to the serial port of the router (Figure 3)

6WHS Connect the other end of the cable to the asynchronous modem that you provide (Figure 4)

6WHS Connect the modem to the telephone line

In case the modem you want to use was formerly connected directly to a system/modality, the modem

needs to be reset to factory defaults before it can be used. For Multitech modems, this procedure is

described in $SSHQL[ -, for other modems, refer to their instruction guide.

)LJXUH

Siemens Remote Service

Installation instruction

COIT-000.812.04.02.02

Rev. 02

02-02

Seite 7/14

CO SGK

Medical Solutions

Siemens AG