Epson EMP-8200 - XGA LCD Projector Kurzreferenz-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Projektor Epson EMP-8200 - XGA LCD Projector herunter. Epson EMP-8200 - XGA LCD Projector 17 Seiten. Epson emp-8200: reference guide
Auch für Epson EMP-8200 - XGA LCD Projector: Betriebshandbuch (36 seiten), Broschüre & Specs (24 seiten)
Seite drucken
Tip
If a laptop computer or a computer with a
LCD screen has been connected to the
projector, you may need to change the
output destination for image signals
depending on the computer keys (
The
,
and other displays are
situated on the computer
keys) or the
computer's settings. The output
destination can normally be changed by
holding down the computer's
and
pressing one of the Function keys.
Once the source has been changed, after
a short wait the projector will start
projecting. If the output has been
changed to external output, only the
external output should be used.
For details, refer to the documentation
provided with your computer.
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
Macintosh
After restarting the computer,
change the Control Panel
monitor and sound settings
so that Mirroring is active.
If images do not appear ...
Press the button that
corresponds to the
port into which
the image device
is connected to
change the input signal.
If you have other problems ...
Refer to the online
Help information.
Help
Help
Press the
or
and then
follow the instructions.
Projecting
Projector
Help
Projector
Remote Control
Help
Remote Control
* Refer to Troubleshooting.
4