Cisco 2811 Series Betrieb - Seite 11

Blättern Sie online oder laden Sie pdf Betrieb für Netzwerk-Router Cisco 2811 Series herunter. Cisco 2811 Series 31 Seiten. 2800 series integrated services routers
Auch für Cisco 2811 Series: Datenblatt (20 seiten), Betrieb (31 seiten), Installieren und Aufrüsten (14 seiten), Schnellstart-Handbuch (47 seiten)

Cisco 2811 Series Betrieb
The following table describes the meaning of Ethernet LEDs on the front panel:
Name
Activity
Duplex
Speed
Link
The physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
the following table:
Router Physical Interface
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
VeNoM Slot
USB Ports
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
VeNoM Slot
USB Ports
10/100 Ethernet LAN Ports
HWIC Ports
Power Switch
Console Port
Auxiliary Port
ENM Slot
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Power LED
Activity LEDs
Auxiliary LED
Compact Flash LED
Console Port
Auxiliary Port
USB Ports
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Solid Orange
AIM0 installed and initialized error
Table 6 – 2821 Rear Panel Indicators
State
Description
Off
Solid/Blinking Green
Off
Solid Green
One Blink Green
Two Blink Green
Off
Solid Green
Table 7 – 2821 Ethernet Indicators
11
Not receiving packets
Receiving packets
Half-Duplex
Full-Duplex
10 Mbps
100 Mbps
No link established
Ethernet link is established
FIPS 140-2 Logical Interface
Data Input Interface
Data Output Interface
Control Input Interface
Status Output Interface