Cisco 2821 Series Betrieb - Seite 3

Blättern Sie online oder laden Sie pdf Betrieb für Netzwerk-Router Cisco 2821 Series herunter. Cisco 2821 Series 31 Seiten. 2800 series integrated services routers
Auch für Cisco 2821 Series: Installation und Upgrades (21 seiten), Datenblatt (20 seiten), Betrieb (31 seiten), Schnellstart-Handbuch (47 seiten)

Seite drucken

Introduction

1.1

Purpose

This document is the non-proprietary Cryptographic Module Security Policy for the Cisco 2811

and 2821 Integrated Services Routers with AIM-VPN/EPII-Plus installed. This security policy

describes how the Cisco 2811 and 2821 Integrated Services Routers (Hardware Version: 2811 or

2821; Firmware Version: IOS 12.4 (15) T3) meet the security requirements of FIPS 140-2, and

how to operate the router enabled in a secure FIPS 140-2 mode. This policy was prepared as part

of the Level 2 FIPS 140-2 validation of the Cisco 2811 or 2821 Integrated Services router.

FIPS 140-2 (Federal Information Processing Standards Publication 140-2 — Security

Requirements for Cryptographic Modules) details the U.S. Government requirements for

cryptographic modules. More information about the FIPS 140-2 standard and validation program

is available on the NIST website at http://csrc.nist.gov/groups/STM/index.html.

1.2

References

This document deals only with operations and capabilities of the 2811 and 2821 routers with

AIM modules in the technical terms of a FIPS 140-2 cryptographic module security policy.

More information is available on the routers from the following sources:

The Cisco Systems website contains information on the full line of Cisco Systems

routers. Please refer to the following website:

http://www.cisco.com/en/US/products/hw/routers/index.html

For answers to technical or sales related questions please refer to the contacts listed on

the Cisco Systems website at www.cisco.com.

The NIST Validated Modules website

(http://csrc.nist.gov/groups/STM/cmvp/validation.html) contains contact information

for answers to technical or sales-related questions for the module.

1.3

Terminology

In this document, the Cisco 2811 or 2821 routers are referred to as the router, the module, or the

system.

1.4

Document Organization

The Security Policy document is part of the FIPS 140-2 Submission Package. In addition to this

document, the Submission Package contains:

Vendor Evidence document

Finite State Machine

Other supporting documentation as additional references

This document provides an overview of the routers and explains their secure configuration and

operation. This introduction section is followed by Section 2, which details the general features

This document may be freely reproduced and distributed whole and intact including this Copyright Notice.