Adjustments
•
Adjusting the image angle
Raise the front of the projector while pressing the
feet buttons on both sides. Extend the front feet.
Front adjustable feet
•
Keystone
When the projector is not set right angles to a
screen, the display distorts in the shape of a
trapezoid. This distortion can be corrected.
The following adjustments can also be made.
p
• Auto Setup (computer connections)
s User's Guide "Adjusting computer generated images"
When projecting computer images, the input signals are detected automatically and
adjusted so that the optimum images are projected. If the results of automatic
adjustment are not satisfactory, individual settings can also be adjusted manually
using the menus.
• Other adjustments s User's Guide " Configuration Menus "
Press the [Menu] button to display the configuration menu. You can use the
configuration menu functions to adjust settings for brightness, contrast and colour.
Turning off the Projector
Turn off the power for all sources
connected to the projector.
Press the [Power] button twice to turn off
the power.
The Power indicator will flash orange (cool-
down in progress/about 20 seconds).
Check that the Power indicator lights
orange, then disconnect the power cable
from the electrical outlet.
Foot adjust button
s
User's Guide
"Adjusting the Display"
•
Adjusting the image size
and focus
Fine adjustments to image size
Press the [Wide] or [Tele] buttons
on the control panel to adjust the
projection size.
[Wide]: increase the size
[Tele] : reduces the size
Adjusting the focus
Turn the focus ring to adjust the
image focus.
s
User's Guide
"Turning off the Projector"
Power indicator
Operating problems may occur if the power
cable is disconnected while the Power
indicator is flashing orange.
Seite drucken