Epson EMP-TW100 Setup-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Setup-Handbuch für Projektor Epson EMP-TW100 herunter. Epson EMP-TW100 12 Seiten. Home theatre projector
Auch für Epson EMP-TW100: Broschüre & Specs (24 seiten), Benutzerhandbuch (9 seiten), Setup-Handbuch (10 seiten)
Seite drucken
Battery Replacement Period and
Using the Remote Control
Battery Replacement Period and Cautions
If the remote control becomes slow in responding or if it stops working, the batteries may
be spent. If this happens, replace the batteries with fresh ones.
Guide for battery replacement: Approximately 3 months if used for 30
minutes per day
* The replacement period given above may vary depending on the amount of usage and
the ambient conditions.
Use the following type of batteries as replacements.
Alkaline dry cell LR6 (AA) x 2
Using the Remote Control
Remote control light-receiving area
Do not allow sunlight or light from fluorescent lamps to shine directly
onto the projector's remote control light-receiving area, otherwise it may
interfere with the reception of signals from the remote control.
(illumination) button
illumination
button
2
Point the remote control
light-emitting area toward one of
the remote control light-receiving
area on the projector and operate
the remote control buttons.
When the
button is pressed, the buttons
shown in colour in the illustration at left are
illuminated for 10 seconds. If you press the
button again during this 10-second period, the
illumination continues for another 10 seconds.