Epson EMP-TW10H Kurzreferenz-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Projektor Epson EMP-TW10H herunter. Epson EMP-TW10H 4 Seiten. Esc/vp21 command user's guide for home projectors
Auch für Epson EMP-TW10H: Spezifikationen (1 seiten), Benutzerhandbuch (9 seiten)

Seite drucken

Changing aspect ratio

Three aspect ratio settings can be selected and applied to the projected image. However, the aspect ratio settings which can

be used differ according to the signal being input.

TV (NTSC, PAL, SECAM)

The aspect ratio changes in the following order each time you press the [Aspect] button.

• You can control Zoom settings in the configuration menus. "Setting"→ "Screen"→ "Zoom Caption"s "Setting menu" User's Guide

• If you project an image that is compressed, enlarged or separated using the aspect function in public places such as a store or hotel

for the purposes of profit-making or public display, it may result in infringing on the author's right that is protected by copyright law.

Saving your preferred image settings (Memory)

You can save a maximum of 8 configuration menu

adjustment values to memory - 2 memories for each of the

four image sources (Input A: Component, Input A: RGB-

Video, Input B and Video/S-Video).

Saving Settings to Memory

Press the [Menu] button.

Set the adjustment values in the configuration menu as you

want them to be saved.

Select "Memory" from the "Image" menu and press the

[e] button.

• If nothing has been saved to either memory 1 or 2, the message "No Entry" will be displayed.

• If you want to revise settings you have made, set the adjustment values as desired, then perform "Saving Settings to Memory".

• When clearing the memory, the settings saved for all image sources will be reset. "Reset" → "Memory Reset"

Printed in China

404951701 (E)

04.XX-XA (G04)

Video signal

SDTV (525i/p, 625i/p)

HDTV (750p, 1125i)

Normal

Squeeze

The adjustment values which can be saved to memory are

Picture Quality (except for Tracking and Sync.), Color Mode,

and Aspect.

Select the Memory number (1 or 2) you want to save to

using the [u] [d] buttons, then press the [e] button.

Recalling Memory

When the image source you want

to recall the settings for is active,

press the [Memory] button on the

remote control to recall the saved

memory settings.

Zoom

Images are projected preserving the

original aspect ratio.

If squeeze mode has also been set

on the connected equipment, such

as a DVD player, images are

projected in 16:9 (widescreen).

Images formatted to 4:3 will be

elongated in this mode.

Images output in 4:3 format are cut

at the top and bottom by a set

amount and resized to 16:9

(widescreen).