Cisco 4000 Series Vorbereiten der Installation - Seite 2
Blättern Sie online oder laden Sie pdf Vorbereiten der Installation für Netzwerk-Router Cisco 4000 Series herunter. Cisco 4000 Series 11 Seiten. Upgrading memory
Auch für Cisco 4000 Series: Handbuch (18 seiten), Installationshandbuch (18 seiten), Ersatz-Handbuch (16 seiten), Upgrade-Handbuch (24 seiten)
Seite drucken
Safety Recommendations
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf
and roll up your sleeves.
Warning
(including rings, necklaces, and watches). Metal objects will heat up when connected to
power and ground and can cause serious burns or weld the metal object to the terminals.
(To see translated versions of this warning, refer to the appendix "Translated Safety
Warnings.")
•
Wear safety glasses when working under any conditions that might be hazardous to your
eyes.
•
Do not perform any action that creates a potential hazard to people or makes the
equipment unsafe.
Warning
earth ground during normal use. (To see translated versions of this warning, refer to the
appendix "Translated Safety Warnings.")
Safety with Electricity
Follow these guidelines when working on equipment powered by electricity:
•
Locate the emergency power-off switch in the room in which you are working. Then, if
an electrical accident occurs, you can act quickly to shut the power off.
•
Before working on the system, turn off the power and unplug the power cord.
•
Disconnect all power before doing the following:
— Installing or removing a chassis
— Working near power supplies
•
Do not work alone if potentially hazardous conditions exist.
2-2 Cisco 4000 Series Installation Guide
Before working on equipment that is connected to power lines, remove jewelry
This equipment is intended to be grounded. Ensure that the host is connected to