Samsung 29A7 Gebrauchsanweisung für den Besitzer - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für den Besitzer für TV Samsung 29A7 herunter. Samsung 29A7 40 Seiten. Samsung cs29a200: user guide
Auch für Samsung 29A7: Gebrauchsanweisung für den Besitzer (40 seiten), Gebrauchsanweisung für den Besitzer (44 seiten), Gebrauchsanweisung für den Besitzer (40 seiten)
Seite drucken
ENG
Plug & Play
Ant. Input : Check
Select
Auto store
Area
: ASIA W/EUROPE
Search
: -/+
Select
Adjust
Time
Clock
Timer
Select
Enter
Function
Language
: English
Time
Plug & Play
Blue screen
Childlock
Demonstration
Select
Enter
Function
Language
: English
Time
Plug & Play
Blue screen
Childlock
Demonstration
Select
Enter
Plug & Play Feature
Exit
Exit
: -- : --
am
: Off
Exit
: Off
Exit
: Off
Exit
10
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
1
If the television is in Standby mode (red light visible on the
television front panel), press the POWER
control.
Result:
The message "Plug & Play" is displayed. It flickers for a
little while and then the "Language" menu is
automatically displayed.
Press the ▲ or ▼ button to select required language. Press the
2
MENU button to enter the language, and then the message "Ant.
Input : Check" is displayed.
➣
If any language is not selected on the "Language" menu, the
"Language" menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
+
–
the
or
button.
Result:
The "Auto store" menu is displayed.
4
Select your country by pressing the
channels, select the "Search" by pressing the ▲ or ▼ button, and
+
then press the
or
Automatically" on page 13). Press the MENU button to skip.
Result:
The "Time" menu is displayed.
5
+
–
Press the
or
button to move to the hour or minute. Set the hour
or minute by pressing the ▲ or ▼ button (refer to "Setting and
Displaying the Current Time" on page 28).
6
When you have finished, press the MENU button.
Result:
The message "ENJOY YOUR WATCHING" is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the MENU button.
Press the ▲ or ▼ button to select the "Function", and then
2
+
–
press the
or
Select the "Plug & Play" by pressing the ▲ or ▼ button, and
3
+
then press the
Result:
The message "Plug & Play" is displayed.
button on the remote
+
–
or
button. To search the
–
button (refer to "Storing the Channels
button.
–
or
button.