Caavo Classic Schnellstart-Handbuch

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Home Theater System Caavo Classic herunter. Caavo Classic 3 Seiten.

Seite drucken

Quick Start Guide

S T E P 1

Create your Caavo Account

If you've already created your Caavo Account,

then skip this step and give yourself a pat on

the back!

If you haven't already created your Caavo

Account online, go to https://setup.caavo.com

and create one. Have your service credentials

handy to make setup go faster. Use the MAC ID

pasted below to pair your account to this

Caavo.

HTTP://SETUP.CAAVO.COM

S T E P 4

Connect Caavo to your TV or AVR

Connect an HDMI cable between the Caavo

OUT

port and one of the inputs on the TV, AVR or

Sound Bar you disconnected in Step 3.

Remember which input you used - this will

help you in Step 6.

If you connected Caavo directly to your

TV, do not use the input label "ARC".

S T E P 2

Charge the Caavo Remote

Unpack your remote, USB cable and wall

charger and connect to a wall outlet to charge.

The LED on the remote

will illuminate red to

indicate it is charging.

S T E P 5

Connect your Source Devices to Caavo

Connect all your source devices to Caavo using

any of the 8 numbered HDMI ports. If you use a

HDMI streaming stick, use the HDMI extender

to help you connect to Caavo.

For more help visit Caavo.com/help

S T E P 3

Disconnect your Source Devices

If you have an AVR or Sound Bar connected to your TV

via HDMI, leave it connected on both ends. Then,

disconnect all your HDMI source devices from your

AVR or Sound Bar. You will connect Caavo to your AVR

or Sound Bar in Step 4.

O R

If you do not have an AVR or Sound Bar or your

AVR/Sound Bar is connected via RCA or optical,

disconnect all your HDMI source devices from your TV.

You will connect Caavo directly to your TV in Step 4.

S T E P 6

Power, Network, and TV On!

Connect the Caavo power cord to a wall outlet.

Connect the supplied ethernet cable from

Caavo to your router for best results. If a wired

ethernet connection is unavailable, WiFi can be

setup later.

Turn on your TV with your TV's remote (and

AVR/Sound Bar too). Follow the on-screen

instructions to complete your setup experience.

Make sure you are on the active input(s) you used

in Step 4 on your TV, AVR, or Sound Bar.