CAB 5410006 Schnellstart-Bedienungsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Schnellstart-Bedienungsanleitung für Etikettenhersteller CAB 5410006 herunter. CAB 5410006 6 Seiten. Barcode / label printer e4 series
Seite drucken
Calibrating the printer is Required when installing label tape for the first
time or when changing label tape to a different size.
Calibration is Recommended when changing label tape and/or ink ribbons
to maintain correct label alignment.
1. Press and hold the CANCEL button until the three indicator lamps
blink, (approximately 4 seconds), then release the button.
2. Press and release the FEED button.
The printer will feed approximately 8 inches, (200 mm), of label tape
and the three lamps will stop blinking and remain lit.
The printer is now calibrated and ready for printing.
Step # 4. Calibrating the media sensor
To Calibrate the printer: