Cisco NC55A2-MOD-SE-H-S Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Netzwerk-Router Cisco NC55A2-MOD-SE-H-S herunter. Cisco NC55A2-MOD-SE-H-S 25 Seiten. Connect router to the network
Seite drucken
Connect to the Management Ethernet Port
Connect to the Management Ethernet Port
The management Ethernet port provides out-of-band management, which enables you to use the command-line
interface (CLI) to manage the router by its IP address. This port uses a 10/100/1000 Ethernet connection with
an RJ-45 interface.
Note
To prevent an IP address conflict, do not connect the management Ethernet port until the initial configuration
is complete.
To connect cables to the system management port, attach Category 5 cables directly to the RJ-45 receptacle
on the management Ethernet port.
Figure 3: NCS 55A1
Figure 4: NCS 55A2
1
Connect Router to the Network
6
Management Ethernet
2
port
Connect Router to the Network
Console port