Cisco NCS 4000 Series Handbuch zur Fehlersuche - Seite 40

Blättern Sie online oder laden Sie pdf Handbuch zur Fehlersuche für Netzwerk-Router Cisco NCS 4000 Series herunter. Cisco NCS 4000 Series 44 Seiten. Network convergence system
Auch für Cisco NCS 4000 Series: Handbuch Auspacken, Umziehen und Sichern (40 seiten)

Seite drucken

Cisco NCS 4000 Series Handbuch zur Fehlersuche

TIMING-FPGA-SEU

Step 2

Ensure the send and expected Trail Trace Identifier (TTI) configurations are correct. In case of mismatch,

configurations needs to be aligned. To set the sent and expected TTI values, use the tti [expected | send]

{ascii |

If the condition does not clear, log into the Technical Support Website at

index.html

TIMING-FPGA-SEU

Default Severity: Critical.

Logical Object: None

TIMING-FPGA-single error upset alarm.

Clear the TIMING-FPGA-SEU Alarm

Procedure

This alarm is automatically cleared by the system, when the Timing-FPGA is upgraded to latest supported

version.

If the condition does not clear, log into the Technical Support Website at

support/index.html

TIMING-ISOLATED-RACK

Default Severity: Critical.

Logical Object: ECU0

TIMING-ISOLATED-RACK alarm occurs when all the TE ports on a rack are down, causing isolation from

timing perspective from all other racks in the MC system.

Clear the TIMING-ISOLATED-RACK Alarm

Procedure

Step 1

Verify that the isolated node is expected as per the topology.

Step 2

Check the physical TE port connections.

Step 3

Check the physical connections between the nodes.

If the condition does not clear, log into the Technical Support Website at

index.html

Alarms Troubleshooting Guide for Cisco NCS 4000 Series

dapi

| hex |

operator-specific | sapi } command.

for more information or call Cisco TAC (1 800 553-2447).

Alarm Management

http://www.cisco.com/c/en/us/support/

http://www.cisco.com/cisco/web/

http://www.cisco.com/c/en/us/support/