Actulux 111891 Handbuch - Seite 12
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör Actulux 111891 herunter. Actulux 111891 20 Seiten.
Seite drucken
Current Limiter and Overload Interrupter
ADVANCED ELECTRONIC CURRENT LIMITER
LIP5 is an advanced electronic product that is used as current
limiter between a 24V DC or 48V DC supply
and 1 actuator.
When the adjusted current limit is reached because of the
load of the actuator, and the load of the actuator hereby
increased further, the speed of the actuator will be
atuomatically reduced.
This way the consumption will not exceed the adjusted level,
e.g. 4 amp. for 24V and 2 amp. for 48V.
CONNECTION & SETTINGS
SW
off
1
2
3
FEATURES
Supply: 24V DC eller 48V DC +/- 15%, Ripple 2 Volt PP
Current limiter:
Type of opening system
SA Power
SA Power
SA Power Mini
Rotary 100
Input resistance: Possibility to connect a 27K ohm resistance over the input clamp connection for monitoring of the line
Size (l x w x h): 100 x 100 x 50 mm
Colour: White
Density: IP54
Terminals: 16 mm²
Approved acc. to: EN60335-1
Marking: CE
12
intelligent and electronic current limiter
on
Max. current
4A
Motor output
Input resistance
Adjustment possibilities for max. current consumption by means of a switch on the board:
24V
48V
3,0A
1,5A
4,0A
2,0A
2,5A
1,25A
2,5A
1,25A
BUILT IN ACTUATOR PROTECTOR
LIP5 has a built in actuator protector. This means that the
voltage will automatically be interrupted if the speed of the
actuator gets relatively very low or stops completely because
of a mechanic locking or end stop.
LIP5 is delivered in a discreet plastic box, which also functions
as a link between the supply and the actuator.
Function
24VDC supply
48VDC supply
on = 27Kohm connected / off = 27Kohm disconnected
- Type LIP5
Settings
OFF
ON
OFF
N/A
3A
4A
2,5A Rotary 100 / SA Mini
N/A
1,5A
2A
1,25A Rotary 100 / SA Mini
OFF
OFF
ON
#121326
ON
ON