Cisco Nexus 9000 Series Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Cisco Nexus 9000 Series herunter. Cisco Nexus 9000 Series 14 Seiten. Switch chassis
Auch für Cisco Nexus 9000 Series: Schnellstart-Konfigurationshandbuch (6 seiten), Konfigurationshandbuch (32 seiten), Konfigurationshandbuch (32 seiten), Handbuch (30 seiten), Installationshandbuch (12 seiten), Installation von (8 seiten), Handbuch (16 seiten)

Installing the Chassis

Warning

Statement 1030 Equipment Installation

Only trained and qualified personnel should be allowed to install, replace, or service this equipment.

Warning

Statement 1091 Installation by an Instructed Person

Only an instructed person or skilled person should be allowed to install, replace, or service this equipment.

See statement 1089 for the definition of an instructed or skilled person.

Warning

Statement 1028 More Than One Power Supply

This unit might have more than one power supply connection. To reduce risk of electric shock, remove all

connections to de-energize the unit.

Warning

Statement 1003 DC Power Disconnection

Before performing any of the following procedures, ensure that power is removed from the DC circuit.

Warning

Statement 1046 Installing or Replacing the Unit

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be

made first and disconnected last.

Warning

Statement 1022 Disconnect Device

To reduce risk of electric shock and fire, a readily accessible two-poled disconnect device must be incorporated

in the fixed wiring.

Warning

Statement 1033 Safety Extra-Low Voltage (SELV)—IEC 60950/ES1–IEC 62368 DC Power Supply

To reduce risk of electric shock, connect the unit only to a DC power source that complies with the SELV

requirements in IEC 60950-based safety standards or ES1 requirements in IEC 62368-based safety standards.

Safety

Installing the Chassis