Cisco SGE2000 Konfigurationshandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Netzwerk-Router Cisco SGE2000 herunter. Cisco SGE2000 46 Seiten. Nx-os fabric extender
Auch für Cisco SGE2000: Handbuch zur Schnellinstallation (32 seiten), Freigabemitteilung (16 seiten), Datenblatt (5 seiten), Firmware-Upgrade-Handbuch (5 seiten), Schnellstart-Handbuch (2 seiten)

Configuring the Fabric Extender

Disassociating a Fabric Extender From an Interface

Before You Begin

Ensure that you have installed and enabled the Fabric Extender feature set.

Ensure that you are in the correct VDC (or use the switchto vdc command).

SUMMARY STEPS

1. configure terminal

2. interface {ethernet slot/port | port-channel channel}

3. no fex associate

DETAILED STEPS

Command or Action

Step 1

configure terminal

Example:

switch# configure terminal

switch(config)#

Step 2

interface {ethernet slot/port | port-channel channel}

Example:

switch(config)# interface port-channel 4

switch(config-if)#

Step 3

no fex associate

Example:

switch(config-if)# no fex associate

You can associate the Fabric Extender to an F2 module.

Before You Begin

Ensure that you have installed and enabled the Fabric Extender feature set.

• switch# configure terminal

• switch(config)# install feature-set fex

• switch(config)# feature-set fex

OL-25816-02

Purpose

Enters configuration mode.

Specifies the interface to configure. The interface can

be an Ethernet interface or a port channel.

Disassociates the Fabric Extender unit attached to the

interface.

Cisco Nexus 2000 Series NX-OS Fabric Extender Software Configuration Guide

Associating a Fabric Extender to a Fabric Interface