CAB MAESTRO 4S Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Water Filtration Systems CAB MAESTRO 4S herunter. CAB MAESTRO 4S 20 Seiten. Pcb separator

Seite drucken
1
Introduction
•
Work going beyond this may only be performed by trained personnel or service technicians.
•
Unauthorized interference with electronic modules or their software can cause malfunctions.
Other unauthorized work on or modifications to the device can also endanger operational safety.
•
Always have service work done in a qualified workshop, where the personnel have the technical knowledge and
•
tools required to do the necessary work.
•
There are various warning stickers on the device. They draw your attention to dangers.
Warning stickers must therefore not be removed, as then you and other people cannot be aware of dangers and
may be injured.
Danger!
Danger to life and limb from power supply.
 Do not open the device casing.
1.4

Safety Marking

1
2
Fig.1
Safety marking
1
2
3
4
Table 1
Safety marking
1.5

Environment

Obsolete devices contain valuable recyclable materials that should be sent for recycling.
 Send to suitable collection points, separately from residual waste.
The modular construction of the printer enables it to be easily disassembled into its component parts.
 Send the parts for recycling.
Emergency Switch
 Press it in a hazardous situation!
Risk of hand injury!
 Wear protective gloves while PCB separating.
Possible damage of electronics!
 Disconnect the PCB separator from the electrical outlet before mounting or
removing an optional conveyor belt.
Hazard by electrical charge!
 Provide an earthing connection via press stud.
3
4
5