Cisco Small Business RV215W Schnellstart-Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Cisco Small Business RV215W herunter. Cisco Small Business RV215W 9 Seiten. Wireless-n vpn firewall
Auch für Cisco Small Business RV215W: Schnellstart-Handbuch (9 seiten), Schnellstart-Handbuch (2 seiten)
Seite drucken
Side Panel
USB—Type A USB port on the right side of the housing that supports
3G/4G/LTE USB dongles.
Connecting the Equipment
3
You must connect a PC to the firewall by using an Ethernet cable to
perform the initial configuration. After the initial configuration,
administrative tasks can be performed through the network or by using a
wireless connection.
To connect a PC to the Cisco RV215W for initial configuration:
Step 1 Power off all equipment, including the cable or DSL modem, the PC,
and the Cisco RV215W.
Step 2 Use an Ethernet cable to connect your cable or DSL modem to the
WAN port on the firewall.
Step 3 Connect another Ethernet cable from one of the LAN (Ethernet)
ports to the Ethernet port on the PC.
Step 4 Power on the cable or DSL modem and wait until the connection is
active.
Step 5 Connect the power adapter to the firewall 12VDC port.
Caution
Use only the power adapter that is supplied with the firewall.
Using a different power adapter could damage the device.
The POWER button is on by default. The power light on the front
panel is solid green when the power adapter is connected
properly and the firewall is finished booting.
Step 6 Plug the other end of the adapter into an electrical outlet. Use the
plug (supplied) specific to your country.
Step 7 Continue with the instructions in the
configure the firewall.
4
Using the Setup Wizard
Cisco RV215W Wireless-N VPN Firewall
to