Cisco Small Business RV220W Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router Cisco Small Business RV220W herunter. Cisco Small Business RV220W 2 Seiten. Factory reset and reboot
Auch für Cisco Small Business RV220W: Handbuch (2 seiten)
![Cisco Small Business RV220W Schnellstart-Handbuch](/uploads/products/server2/557989/557989.jpg)
Back Panel
RESET Button—The RESET button has two functions:
• If the Cisco RV220W is having problems connecting to the Internet, press
the RESET button for at least 3 but no more than 10 seconds with a paper
clip or a pencil tip. This is similar to pressing the reset button on your PC to
reboot it.
• If you are experiencing extreme problems with the Cisco RV220W and have
tried all other troubleshooting measures, press and hold in the RESET
button for more than 10 seconds. This reboots the unit and restores the
factory defaults. Changes you have made to the Cisco RV220W settings
are lost.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Small Business Support US: 1-866-606-1866 (Toll Free, 24/7)
Small Business Support, Global: www.cisco.com/go/sbsc
78-19733-01
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and
other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks.
Third party trademarks mentioned are the property of their respective owners. The use of the word
partner does not imply a partnership relationship between Cisco and any other company. (1005R)
© 2010 Cisco Systems, Inc. All rights reserved.
WAN Port—The WAN port is connected to your Internet device, such as a
cable or DSL modem.
LAN Ports (1-4)—These ports provide a LAN connection to network devices,
such as PCs, print servers, or switches.
Power Port—The power port is where you connect the provided power
adapter.
Power Switch—Press this button up (toward the line) to turn the firewall on.
Press this button down (toward the circle) to turn the firewall off.
Connecting the Equipment
4
You should already have an Ethernet cable connecting your PC to your
S
TEP
1
current cable or DSL modem. Unplug one end of the cable from your PC
and plug it into the port marked "WAN" on the unit.
S
2
Connect one end of a different Ethernet cable to one of the LAN
TEP
(Ethernet) ports on the back of the unit. (In this example, the LAN 2 port
is used.) Connect the other end to an Ethernet port on the PC that you
will use to run the web-based Device Manager.
S
3
Power on the cable or DSL modem and wait until the connection is
TEP
active.
S
4
Connect the power adapter to the Cisco RV220W POWER port.
TEP
C
Use only the power adapter that is supplied with the unit. Using
AUTION
a different power adapter could damage the unit.
Plug the other end of the adapter into an electrical outlet. You may
S
TEP
5
need to use a specific plug (supplied) for your country.
On the Cisco RV220W, push the power button to the on position to turn
S
TEP
6
on the firewall. The POWER light on the front panel is green when the
power adapter is connected properly and the unit is turned on.
Getting Started with the Configuration
5
The Device Manager is supported on Microsoft Internet Explorer 6.0 or
N
OTE
later, Mozilla Firefox 3.0 or later, and Apple Safari 3.0 or later.
Logging In
S
1
Power on the PC that you connected to the LAN2 port in Step 2 of the
TEP
Connecting the Equipment
section. Your PC becomes a DHCP client
of the firewall and receives an IP address in the 192. 1 68. 1 .xxx range.
Start a web browser on your PC. In the Address bar, enter the default
S
2
TEP
IP address of the firewall: 192. 1 68. 1 . 1 . A message appears about the
site's security certificate. The Cisco RV220W uses a self-signed
security certificate and this message appears because the firewall is
not known to your PC. You can safely click Continue (or the option
shown on your particular web browser) to go to the web site.
S
3
When the login page appears, enter the user name and password. The
TEP
default user name is cisco. The default password is cisco. Passwords
are case sensitive.
For security reasons, change the default user name and password as
N
OTE
soon as possible. See the
Changing the Administrator User Name and
Password
section.
S
4
Click Log In.
TEP
The Getting Started page displays some of the most common configuration
tasks. Click these tasks to view the configuration windows.
To view other configuration tasks, click a menu item on the left panel to expand
it. Click the menu names displayed underneath to perform an action or view a
sub-menu.
Configuring WAN (Internet) Settings
From the Getting Started page, click Configure WAN Settings. The Cisco
RV220W tries to automatically detect and configure your settings; however, in
some cases you might need to provide information about your Internet
connection type. You can get this information from your Internet Service
Provider (ISP). See the Online Help or
Cisco RV220W Administrator Guide
for
more information on configuring Internet settings.
Changing the Administrator User Name and Password
S
1
In the left panel, choose Administration.
TEP
S
2
Click Users, and choose Users. The Users Table appears. The default
TEP
administrator user and password is listed and is noted by
"Administrator," which appears in the Type column.
S
3
Check the box for the administrator user, and click Edit. Follow the
TEP
instructions in the Online Help to change the password and save.
Configuring Wireless Settings and Security
From the Getting Started page, click Review Wireless Profile and Set Security
Settings. See the Online Help or
Cisco RV220W Administrator Guide
for more
information.
Where to Go From Here
6
Support
Cisco Small Business
www.cisco.com/go/smallbizsupport
Support Community
Cisco Small Business
www.cisco.com/go/smallbizhelp
Support and Resources
Phone Support Contacts
www.cisco.com/en/US/support/
tsd_cisco_small_business
_support_center_contacts.html
Cisco Small Business
www.cisco.com/cisco/web/download/
Firmware Downloads
index.html
Select a link to download firmware for Cisco
Small Business Products. No login is
required.
Product Documentation
Cisco Small Business
www.cisco.com/go/smallbizrouters
Routers and Firewalls
Cisco Small Business
Cisco Partner Central
www.cisco.com/web/partners/sell/smb
for Small Business
(Partner Login Required)
Cisco Small Business
www.cisco.com/smb
Home