Cisco vEdge 100 Hardware-Installationshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Router Cisco vEdge 100 herunter. Cisco vEdge 100 22 Seiten.

vEdge 100 Router

2. Secure the router with a Kensington lock. To do so, first attach the lock plate from packet C to the back

of the chassis, then insert the lock in the slot.

Figure 5: Securing the Router with a Kensington Lock

Tip: It is recommended that you retain the dust covers on any unused ports.

Mount the vEdge 100 Router on the Wall

To mount the vEdge 100 router on the wall:

1. Screw the four shoulder screws in the packet marked D into the pre-drilled holes on the underside of the

router chassis as shown in Figure 6. Tighten the screws until wrist tight. Note that the screw heads will

not be flush with the chassis bottom.

Figure 6: Attach Screws to the Underside of the vEdge 100 Router Chassis

1. Secure the mounting plate to the wall using four screws appropriate for your wall type (screws not included).

Ensure that the L-shaped bracket of the mounting plate is to the upper left.

Figure 7: Securing the Mounting Plate to the Wall

Install the vEdge 100 Router

vEdge 100 Router