CABAC T8211D Betriebshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Multimeter CABAC T8211D herunter. CABAC T8211D 11 Seiten. Pen type digital multimeter
Seite drucken1.3 SYMBOLS
Important safety information, refer to the operating manual.
Double insulation（Protection classΙΙ）
Overvoltage (Installation) category III, Pollution Degree 2 per IEC1010-1 refers to the level of
CAT
Impulse Withstand Voltage protection provided.
ΙΙΙ
Conforms to European union directive
Earth ground
Alternating current
AC
Direct current
DC
AC or DC (alternating current or direct current)
Diode
Continuity buzzer
The maximum value is being held.
M.H
This indicates that the display data is being held.
D-H
Auto range
AUTO
The battery is not sufficient for proper operation.
1.4 MAINTENANCE
1.4.1 Please do not attempt to adjust or repair the meter by removing the rear case while voltage is being applied.
A technician who fully understands danger involved should only carry out such actions.
1.4.2 Before opening the battery cover or case of the meter, always disconnect the tip of meter and the probe of the test lead
(or test clip) from all tested circuits.
1.4.3 To avoid the wrong reading causing electricity attack, when the meter displays"
1.4.4 Do not use abrasives or solvents on the meter, use a damp cloth and mild detergent only.
1.4.5 Always set the transform switch to the OFF position when the meter is not in use.
1.4.6 If the meter is to be stored for a long period of time, the batteries should be removed to prevent damage to the unit.
2. DESCRIPTION
- This meter is a portable professional measuring instrument with handsome LCD easily reading.
- Single operation of a transform switch makes measurement convenient. Overload protection and low battery indication
are provided, this meter is ideal for use in the fields, workshop, school, hobby and home applications.
- This meter has function of auto range and manual range.
- This meter has function of auto power off.
- This meter is with the functions of data hold and maximum value measure and hold.
- When using, it can show ranges engineering unit enunciators measuring results.
2.1 NAMES OF COMPONENTS
1 Probe
2 Rotatable Probe Socket
3 LED Indicator
4 Protection Ring
5 Transform Switch
6 DATA-H Button
7 RANGE Button
8 MAX.H Button
9 FUNC. Button
10 Panel
11 LCD Display
12 COM Jack
Customer Care Australia P: 133 122 F: 1300 303 310 E: [email protected] W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: [email protected] W: cabac.co.nz
", you must change the battery.
3