CABAC HNS010RL Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schalter CABAC HNS010RL herunter. CABAC HNS010RL 4 Seiten.

5. ASSEMBLY / INSTALLATION (CONT.)

5.3 IN WALL INSTALLATION

• Using the cable tie feature of the HNS010RL, the unit can be mounted in-wall if required.

• Figure 5 shows an example of how the HNS010RL may be mounted in-wall by using the cable tie feature

of both the HNS010RL and the Cabac 3-Wire S-Click range products (e.g. HNS440TM, HNS450TM or

HNS460SW).

6. IMPORTANT SAFETY WARNINGS

6.1 INSTALLATION

• The HNS010RL is to be installed as part of a fixed wire electrical installation. By law, such installations must

be made by an electrical contractor or similarly qualified person. Avoid excessive force during installation.

6.2 CLEANING

• Clean only with a damp cloth. Do not use abrasives or chemicals.

7. WARRANTY AND DISCLAIMER

CABAC warrant the product against manufacturing and material defect from the date of invoice to the

initial purchaser for a period of 12 months. During the warranty period CABAC will replace products that

proved to be defective where the product has been correctly installed and maintained and operated within

the specifications defined in the product data sheet and where the product is not subjected to mechanical

damage or chemical attack. The warranty is also conditional that the unit being installed by a licensed

electrical contractor. No other warranty is expressed or implied.

CABAC shall not be liable for any direct, indirect, incidental or consequential damages.

Note: This manual was correct at the time of manufacture. For the latest version of the manual and any technical or

safety updates refer to the website:- cabac.com.au, cabac.co.nz or scan the QR code with a mobile phone.

Figure 5: In wall installation.