Cisco WUMC710 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Netzwerk-Router Cisco WUMC710 herunter. Cisco WUMC710 17 Seiten. 802.11ac
Auch für Cisco WUMC710: Benutzerhandbuch (17 seiten), Handbuch zur Schnellinstallation (17 seiten)

Seite drucken
Cisco WUMC710 Benutzerhandbuch
Linksys WUMC710

Wireless Network Site Survey

Number of Wireless Networks
The number of wireless networks detected by
the bridge is displayed
Select
To connect to a wireless network, click Select Then click Connect
Wireless Network Name
The network name or SSID of the wireless network
is displayed
GHz
The radio band of the wireless network is displayed
Signal
The percentage of signal strength is displayed 100% is the strongest
signal strength possible; 0% is the weakest possible
Security
If the network supports Wi-Fi Protected Setup, the Wi-Fi Protected
Setup icon
is displayed The security method used by the wireless network
is displayed
Click Refresh to update the on-screen information
After you have selected a network, click Connect A new screen appears Follow
the instructions for the security method of your network
WPA
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WPA Personal is automatically displayed
Encryption
WPA supports the TKIP encryption method, with dynamic
encryption keys
Passphrase
Enter the key shared by the bridge and wireless router or access
point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
WPA2
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WPA2 Personal is automatically displayed
Encryption
WPA2 supports two encryption methods, TKIP and AES, with
dynamic encryption keys Select the encryption method, AES or TKIP or AES
Passphrase
Enter the key shared by the bridge and wireless router or access
point It must have 8-63 characters
Click Refresh to update the on-screen information
After you have entered the security settings, click Connect
WEP
Network Name (SSID)
The name of the network you selected is automatically
displayed
Security Mode
WEP is automatically displayed
Encryption
Select a level of WEP encryption, 40/64 bits (10 hex digits) or
104/128 bits (26 hex digits)
Advanced Configuration
10