Cisco 800 Series Konfigurieren von - Seite 12

Blättern Sie online oder laden Sie pdf Konfigurieren von für Drahtloser Zugangspunkt Cisco 800 Series herunter. Cisco 800 Series 32 Seiten. Fast step software design guide
Auch für Cisco 800 Series: Anmerkungen zur Veröffentlichung (36 seiten), Schnellstart-Handbuch (13 seiten), Schnellstart-Handbuch (17 seiten), Design-Handbuch (50 seiten)

How to Configure Radio Settings on an Access Point

Command or Action

Step 4

dfs band frequency-group block

Example:

Router(config-if)# dfs band 1 2 block

Step 5

end

Example:

Router(config-if)# end

Step 6

show controllers dot11Radio interface

Example:

Router# show controllers dot11Radio 0/0/1

Step 7

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuring Radio Settings on an Access Point

Purpose

Prevents an access point from selecting a specific group of

frequencies during DFS.

•

The frequency-group value can be 1, 2, 3, or 4:

–

1 specifies frequencies 5.150 to 5.250 GHz.

–

2 specifies frequencies 5.250 to 5.350 GHz.

–

3 specifies frequencies 5.470 to 5.725 GHz.

4 specifies frequencies 5.725 to 5.825 GHz.

–

At least one group of frequencies must be specified.

•

Multiple groups are allowed.

Returns to privileged EXEC mode.

(Optional) Displays radio controller status.

The Current Frequency line of the output displays the

•

status of DFS, for example:

Current Frequency: 5300 MHz Channel 60 (DFS

enabled)

(Optional) Saves your entries in the configuration file.