CABASSE Java Benutzerhandbuch - Seite 10
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem CABASSE Java herunter. CABASSE Java 17 Seiten.
Auch für CABASSE Java: Benutzerhandbuch (17 seiten), Broschüre (2 seiten), Broschüre (7 seiten)
Seite drucken
e n g l i s h
be distinctly
located between the loudspeakers with a slight loss
of bass and low midrange level. If the image is confused and
not centrally located and there is a drastic loss of bass and
low midrange level, recheck your connections.
HOME
THEATER CONNECTIONS
WITH AN ACTIVE SUBWOOFER
Subwoofer positioning
With a
crossover point below or around 150 Hz, the installa-
tion position of subwoofers is not limited as human ears and
brains are not able to identify the emitting point of such low
frequencies. To get the best result, it is recommended to try dif-
ferent positions and choose the one giving the best response
in the low frequencies, taking into account the room acoustics.
Hooking up the
subwoofer
2 possibilities
are offered to connect the subwoofer with your
system:
the low
level one requiring the use of the
9
and LINE OUT
terminals and shielded coaxial connectors,
the high
level one requiring the use of the
0
INPUT
and HIGH LEVEL OUTPUT
loudspeaker cables.
The inputs are stereo ones, the mix of the
low
frequencies being done by the amplifier of the subwoofer.
If the input signal is already mono, only one input
(right)
should be used.
8
Cinch
RCA LINE IN
HIGH LEVEL
-
terminals and standard
L
(left)
and R (right)
L
(left)
or R
Interconnections with the Cinch
9
and LINE OUT
connectors
Connections to the
LINE IN
If your
preamplifier or your integrated amplifier is fitted with
a stereo low-level output, then connect its
outputs to the L
(left)
and R (right)
woofer. If your amplifier offers a one mono output, connect it
to either the
L
(left)
or the R (right)
Connections from the
LINE OUT
The signal
from the
L
(left)
and R (right)
tors is the one being brought in by the
8
IN
connectors filtered at 40 Hz. These outputs can thus
be used to bring the signal to the amplifier powering the main
loudspeaker.
Interconnections with the
Connections to
HIGH LEVEL INPUT
If the
preamp section of your Hi Fi or audio-video system is not
fitted with a low level output, you should then connect the
subwoofer by using its loudspeaker terminals. When connec-
ting the
L
(left)
and R (right)
speaker outputs of your amplifier
0
to the
HIGH LEVEL INPUT
plugs of the
ful not to cross (-) and (+) cord of either
channel. Such a phase
inversion might damage your main
amplifier.
SPECIFICATIONS & TECHNICAL DATA
MT4
Position
SAMOA
booksheft/
main
speaker
stand
MOOREA
floorstanding
main
speaker
JAVA
floorstanding
main
speaker
FARO
on/under
center*
screen
BORNEO
on wall/
surround
booksheft
MERCURE
floorstanding
active subwoofer
* Magnetic shielding
8
RCA LINE IN
8
L
(left)
and R (right)
0
LINE IN
inputs of the
sub-
0
subwoofer
LINE IN
inputs.
9
9
LINE OUT
connec-
L
(left)
and R (right)
LINE
speaker terminals
0
plugs
subwoofer, be care-
L
(left)
or R (right)
Ways
Drivers complement
2
1 tweeter DOM42
1 x 17 cm 17MD18LB1
2
1 tweeter DOM42
2
x 17 cm 17MD18LB1
3
1 tweeter DOM42
1
13 cm 13MD15M2
x
2
17 cm 17MD18LB1
x
2
1 tweeter DOM42
1
13 cm 13MD15M2TV
x
2
1 tweeter DOM42
1 x 17 cm 17MD18LB1
1
1 x 21 cm 21MT4