Cisco Aironet 1300 Series Schnellstart-Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt Cisco Aironet 1300 Series herunter. Cisco Aironet 1300 Series 35 Seiten. Outdoor access point/bridge
Auch für Cisco Aironet 1300 Series: Datenblatt (15 seiten)
Seite drucken
When you assign an IP address to the access point/bridge using the CLI, you
must assign the address to the BVI. Beginning in a privileged EXEC mode,
follow these steps to assign an IP address to the access point/bridge's BVI:
Command
Step 1
configure terminal
Step 2
Interface bvi1
Step 3
ip address address mask Assigns an IP address and subnet mask
Note
If you used a Telnet session to connect to the access point, you lose
your connection when you assign a new IP address to the BVI. If you
need to continue configuring the access point using Telnet, use the
new IP address to open another Telnet session to the access point.
Quick Start Guide Cisco Aironet 1300 Series Access Point
Purpose
Enters global configuration mode.
Enters interface configuration mode
for the BVI.
address to the BVI.
17