DigitaLinx DL-HD70LS-TX Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Extender DigitaLinx DL-HD70LS-TX herunter. DigitaLinx DL-HD70LS-TX 4 Seiten. Slim 70m hdmi with ir extender set transmitter/receiver
Seite drucken
The DigitaLinx DL-HD70LS extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D),
including HDCP 2.2, and bidirectional IR up to 70 meters away using a single solid core,
shielded Category 5e twisted pair cable.
Built-in surge protection helps ensure hassle-free and robust installations. The 12 volt
power supply is secured with a screw-on connector to prevent the power from being
accidentally disconnected.
The DL-HD70LS is sold only as a set. The individual transmitter and receiver are not
compatible with other HDBaseT devices due to proprietary PoE circuitry.
1.
Verify all components included with the extender set are present before installation.
2.
If the extenders are going to be permanently mounted to a surface, attach the
included mounting brackets with the supplied screws.
3.
Turn off power and disconnect the audio/video equipment by following the
manufacturer's instructions.
4.
Connect solid core, shielded Category 6 or greater twisted pair cable with RJ45
connectors between the transmitter and the receiver. TIA/EIA-568B straight-
through wiring connections must be used.
5.
Connect an HDMI cable and any desired control accessories between the display
and the receiver.
6.
Connect an HDMI cable and any desired control accessories between the source
and the transmitter.
7.
Connect the included power supply to the transmitter or the receiver and lock the
power supply to the power connector by twisting the locking collar clockwise.
8.
Power on attached audio/video devices.
LED States
Solid Link - Link established between transmitter and receiver
Flashing HDCP - HDMI signal is not encrypted
Solid HDCP - HDMI signal is encrypted
1
8
TIA/EIA-568B
P n 1
Or n e/Wh te
P n 2
Or n e
P n 3
Green/Wh te
P n 4
P n 5
Blue/Wh te
P n 6
Green
P n 7
Brown/Wh te
P n 8
Brown
Instructions
Twisted Pair Wiring
Use TIA/EIA-568B wiring for Category
Blue
5e connections between transmit and
receive units.