DigitaLinx DL-HDE100-H2 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Extender DigitaLinx DL-HDE100-H2 herunter. DigitaLinx DL-HDE100-H2 15 Seiten.

1. DC 12V - Locking power supply port (transmitter)

2. HDBT OUT - HDBaseT output; RJ45 connection

3. IR IN - 3.5mm IR input port for connection to IR receiver or 3rd party IR system

4. IR OUT - 3.5mm IR output port for connection to IR emitter

5. RS232 - 3 pin Phoenix connector port for passing RS232 control to transmitter location

6. HDMI IN - HDMI input port for connection to HDMI video source

7. ETHERNET - RJ45 port for passing Ethernet to receiver / display location

Front Panel LED States for Transmitter / Receiver

POWER (RED) - Solid when device is powered ON

STATUS (BLUE) - When blinking the device is working properly

HDCP (BLUE) - Solid when HDMI signal is encrypted; blinking

when non -HDCP protected content is transmitted; OFF when

no content is being transmitted

LINK (GREEN) - Solid when successful link between transmitter

and receiver is established; off or blinking indicates a physical

link error

Front and Rear Panels

DL-HDE100-H2 Owners Manual