Cisco aironet 1524SB Hardware-Handbuch Addendum - Seite 13

Blättern Sie online oder laden Sie pdf Hardware-Handbuch Addendum für Drahtloser Zugangspunkt Cisco aironet 1524SB herunter. Cisco aironet 1524SB 15 Seiten. Outdoor mesh access point

Seite drucken

Figure 5

Removing and Replacing the Reset Button Cover

The access point reset button is recessed in a small hole, sealed with a Phillips screw cover and rubber

gasket. To remove and replace the reset button cover, follow these steps:

Use a Phillips screwdriver to remove the reset button cover. Be careful not to lose the screw and rubber

Step 1

gasket.

Use a straightened paper clip to perform the intended action (reset the access point or disable the

Step 2

battery).

Replace the rubber gasket and start the reset button cover into the threaded hole.

Step 3

Use a Phillips screwdriver to tighten the cover to 22 to 24 in. lbs (2.49 to 2.71 Nm).

Step 4

OL-19762-01

Reset Button Location

Reset button

Cisco Aironet 1524SB Outdoor Mesh Access Point Hardware Addendum