Cisco Aironet 1600 Series Spezifikationsblatt - Seite 6

Blättern Sie online oder laden Sie pdf Spezifikationsblatt für Drahtloser Zugangspunkt Cisco Aironet 1600 Series herunter. Cisco Aironet 1600 Series 16 Seiten. Aironet 1600 series access point
Auch für Cisco Aironet 1600 Series: Handbuch "Erste Schritte (39 seiten)

Cisco Aironet 1600 Series Spezifikationsblatt
Feature Overview
Figure 4
Area 1
The following example shows the forwarding that occurs between sites from the standpoint of how PE-1
views the 10.3.1.7/32 prefix, the loopback1 interface of the Winchester CE router in
PE-1# show ip bgp vpnv4 all 10.3.1.7
BGP routing table entry for 100:251:10.3.1.7/32, version 124
Paths: (1 available, best #1)
Local
10.3.1.2 (metric 30) from 10.3.1.2 (10.3.1.2)
PE-1# show ip route vrf ospf 10.3.1.7
Routing entry for 10.3.1.7/32
Known via "ospf 100", distance 110, metric 13, type intra area
Redistributing via bgp 215
Last update from 10.3.1.2 00:12:59 ago
Routing Descriptor Blocks:
10.3.1.2 (Default-IP-Routing-Table), from 10.3.1.7, 00:12:59 ago
The next example shows forwarding information in which the next hop for the route, 10.3.1.2, is the PE-3
router rather than the PE-2 router (which is the best path according to OSPF). The reason the OSPF route is
not redistributed to BGP on the PE is because the other end of the sham-link already redistributed the route
to BGP and there is no need for duplication. The OSPF sham-link is used only to influence intra-area path
selection. When sending traffic to a particular destination, the PE router uses the MP-BGP forwarding
information.
PE-1# show ip bgp vpnv4 all tag | begin 10.3.1.7
10.3.1.7/32
PE-1# show tag-switching forwarding 10.3.1.2
Local
tag
31
42
Cisco IOS Release 12.2(8)T
6
Sham-Link Example
MPLS VPN Backbone
Sham-link
PE-1
10.3.1.6
Vienna
10.3.1.15
Origin incomplete, metric 11, localpref 100, valid, internal,
best
Extended Community: RT:1:793 OSPF DOMAIN ID:0.0.0.100 OSPF
RT:1:2:0 OSPF 2
10.3.1.2
Outgoing
Prefix
tag or VC
or Tunnel Id
10.3.1.2/32
PE-3
Sham-link
10.3.1.2
PE-2
10.3.1.5
Stockholm
10.3.1.3
notag/38
Bytes tag
Outgoing
switched
interface
0
PO3/0/0
OSPF Sham-Link Support for MPLS VPN
Winchester
10.3.1.7
Area 1
Brighton
Area 1
Figure
4.
Next Hop
point2point