Cisco Aironet 1815T Handbuch "Erste Schritte - Seite 9

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Drahtloser Zugangspunkt Cisco Aironet 1815T herunter. Cisco Aironet 1815T 30 Seiten. Officeextend access points

Seite drucken

Mounting and Powering the Access Point

The access point can be placed/mounted in a horizontal position, on a horizontal surface such as a

table.

To ensure the best RF coverage for your access point, place your access point in an area as close to the

wireless clients as possible and practical to do so. If the Internet source or gateway router is in a remote

area, position your access point away from metal obstructions.

Areas to avoid or places that may result in reduced range or performance are as follows.

• In a basement of a multi-story home, as the signals must penetrate many walls.

• Near large obstructions that can block the radio signals. Avoid areas like metal cabinets or

refrigerators.

• On the floor under a metal desk or other dense or conductive objects.

The AP is powered using 44 to 57 VDC power via the VDC port, using Cisco Power Adapter

AIR-PWR-D=. The PoE-Out port provides 802.3af Class 0 (15.4W) power.